Comments on: [ klinik mikrotik ] Load Balancing

By: tas branded

tas branded — Mon, 26 Jul 2010 04:33:25 +0000

Nambah ilmu baru nih…….tk

By: Tas Wanita

Tas Wanita — Thu, 13 May 2010 02:52:47 +0000

wah artikelnya seru neh, sehingga banyak komen komen.

makasih ya atas sharingnya.

By: anto

anto — Fri, 15 Jan 2010 11:22:05 +0000

apakah mikrotik load balancing ntu cuma di ISP ya???

kalo misalnya load blancingnya ke FTP ferver ada ga ya konfigurasinya di mikrotik??

By: Omadata Surabaya Data Center

Omadata Surabaya Data Center — Tue, 20 Oct 2009 01:35:46 +0000

terima kasih sharing teman2, kami juga lagi implementasi multihoming dgn mikrotik

By: zidan

zidan — Fri, 04 Sep 2009 15:21:54 +0000

bagus banget info nya dan sangat berguna sekali

By: wireless

wireless — Mon, 20 Jul 2009 00:41:53 +0000

wahh.. infonya keren.. makasih infonya mas, baru belajar buat RTRW-net nih dirumah

By: perlasukan

perlasukan — Fri, 17 Jul 2009 12:41:59 +0000

@al-carati : mikrotik kan pake kernel linux, Mas …

By: al-carati

al-carati — Fri, 17 Jul 2009 02:05:01 +0000

itu pake linux or mikrotik mas???

By: perlasukan

perlasukan — Wed, 15 Jul 2009 14:44:04 +0000

Salam kenal…
Saya baru belajar juga pake Mikrotik , di tempat kerja saya pake 2 ISP dgn load balancing,
ip untuk masing-masing interface seperti berikut :
Local : 123.123.123.1/24
ISP1 : 61.62.63.64/28 gw : 61.62.63.1
ISP2 : 10.10.10.10/28 gw : 10.10.10.1

settingan saya seperti ini :
/ ip address
add address=123.123.123.1/24 interface=Local comment=”” disabled=no
add address=61.62.63.64/28 interface=ISP1 comment=”” disabled=no
add address=10.10.10.10/28 interface=ISP2 comment=”” disabled=no

router punya 2 upstream (WAN) interfaces dengan ip address 61.62.63.64/28 dan 10.10.10.10/28.
interface LAN dengan nama interface “Local” ip address 123.123.123.1/24

penanda koneksi :
/ ip firewall mangle
add chain=prerouting in-interface=Local connection-state=new nth=1,2,0 \
action=mark-connection new-connection-mark=koneksi1 passthrough=yes comment=”” \
disabled=no
add chain=prerouting in-interface=Local connection-mark=koneksi1 action=mark-routing \
new-routing-mark=koneksi1 passthrough=no comment=”” disabled=no
add chain=prerouting in-interface=Local connection-state=new nth=1,2,1 \
action=mark-connection new-connection-mark=koneksi2 passthrough=yes comment=”” \
disabled=no
add chain=prerouting in-interface=Local connection-mark=koneksi2 action=mark-routing \
new-routing-mark=koneksi2 passthrough=no comment=”” disabled=no

Rule NAT :
/ ip firewall nat
add chain=srcnat connection-mark=koneksi1 action=src-nat to-addresses=61.62.63.64\
to-ports=0-65535 comment=”” disabled=no
add chain=srcnat connection-mark=koneksi2 action=src-nat to-addresses=10.10.10.10 \
to-ports=0-65535 comment=”” disabled=no

Routing nya :

/ ip route
add dst-address=0.0.0.0/0 gateway=61.62.63.1 scope=255 target-scope=10 routing-mark=koneksi1 comment=”” disabled=no
add dst-address=0.0.0.0/0 gateway=10.10.10.1 scope=255 target-scope=10 routing-mark=koneksi2 comment=”” disabled=no
add dst-address=0.0.0.0/0 gateway=10.10.10.1 scope=255 target-scope=10 comment=””
disabled=no

Mudah-mudahan bisa membantu….

By: Ode

Ode — Wed, 01 Jul 2009 15:32:37 +0000

@KuLoNiKiSHiNTeN

salah copas bos… harusnya ngikutin masing2 kelompok ip… sorry…